Fashionable Two Way Bluet

ZHP-015-BL

Attention:

1. If you no need to use this model, Please don’t forget to put the button back to “HP” 

2. When you want to use as a headset, Please don’t forget to put the button back to “HP”

Rest on the “SP”, The sounds is too large,Will hurt the ears. 

Instructions:

Turn the volume of your music device all the way down. plug in and wear as headphones.

Increase volume slowly to the desired level. You can adjust the band to fit.

Switch to the speaker, Please turn to “SP”

The feature of the headphones is that you can use as ordinary headphones but also share your music like a boom box. remove headphones from your head. With your music device connected, Put the button to “SP” (both ear cups be rotated) to activate the external speaker. Adjust ear cups to desired angle and increase to desired volume.

Flipping back to headphone mode is as  simple as  put the button back to “HP”.

Bluetooth operation:

1.Turn on headphone first, Hold the “Bluetooth” button around 2 seconds until a voice "power on" from the headphone.

2. Activate your phone’s Bluetooth function and enter its searching mode.

3. Press and hold the “Bluetooth” button on your headset until a voice "Ready for pair" from the speaker (in speaker mode)—this will activate the pairing mode.

Your mobile phone will automatically find a new Bluetooth device called “ZHP-015-BL”.connect to this device and wait until a voice "di"  from the speaker.  this indicates that your headset is now successfully connected.

5. Press the “+”or”-“ button once , you can adjust the sound to a moderate volume and enjoy the music.

  Press and hold the “+”or”-“ button, you can choice the next track or previous track.

6. To switch off your headset, press and hold the “Bluetooth” button until a voice "power off" from the speaker then release the button.

7. When the headset turn on,Press the”Bluetooth” button 2 seconds, you can enter into  voice assistant.

Receiving incoming calls:

When receiving an incoming call, your music track will pause and you will be able to hear your regular ring tone. To accept the call, press the “Bluetooth” button on your headset once. To reject the call hold the “Bluetooth”button. Once the call is finished, your track will start again automatically.When the headset is in standby mode, Press”Bluetooth” button 2 times to re-dial

Recharging:

When used as a general wired headset, it is not required to power.

When used as a Bluetooth headsets or speaker, it is necessary to supply power.

The headphone with a powerful amplified speaker, the speaker is energized by a durable rechargeable

Li-Polymer battery.

LED LIGHT:

1.When you switch to speaker,(HP),Blue LED Long light.

2.When charging, Red LED Long light.

3.When full charge, Red light is off.

4.When you hear a voice “Battery low” from the speaker(in speaker mode). this will take approx. 2.5 hrs  to charge the Headset ,You may charge while also listening to music in Speaker Mode.  Note the headset will still function, you should recharge as soon as possible to make sure the headset continues to work in speaker mode.

5.Put the button to “SP” to switch the speaker, or collapsing for storage automatically reduces power for longest battery life.

6.With the Headsets, Your headset will shut off automatically after 5 minutes without an audio signal from your device.

Bluetooth headphone with

Bluetooth Sport Headset-6

●Bluetooth ：JL  Support 4.2
●Rated power：10mW*2
●Charging Voltage：USB port  DC—5V  I≥100MA
●Spec. Of Speaker ：OD23MM  32Ω 10mW Multimedia speaker
●Battery Capacity：3.7V/100MAh
●Charge Time：1.5 hours
●Working Time：≥4H  When the volume is lower than 50%
●Available Distance：≥10M
●MIC： -43dB±3dB

Two Way Bluetooth Headset

Two Way Bluetooth Headest (Headset and Speaker)